Supreme Gaming

Ik neem aan dat het Wesmaster is..

 

Ik zou me balen als ik Wesmaster was

 

Dats wessy idd.

 

oei

 

Nee jongens, hij is 'veranderd' sinds die foto dus no worries.

 

kwa karakter

 

Ons team heeft al een aantal dagen geen clanmatch gehad, terwijl we toch iedereen een bericht sturen om te vragen of ze willen.

Dus mijn vraag: Zit je in een clan die tegen ons wilt spelen *Behalve qG Gna Gna* add dan even SG 12eaper of mij SG dSis.

Uiteraard spelen wij het liefst de WCG settings maar als jullie iets anders willen kunnen we het hier wel over eens worden denk ik.


Greetz dSis

 

gozer hier heb je GameBattles voor ..

www.gamebattles.com
> ladders
> GoW European Summer Ladder
GoW International Summer Ladder / MLG Ladder
> Sign Up

Graag Gedaan, Super de Boer..

 

We hebben al een scrim team maar SG gaat het voorlopig rustig aan doen.

 

SG - jippie! Jullie gaan het ver schoppen in Seattle!

 

Als ze er komen

 

hehe 30 Augustus zal t gezien worden... Maarja wij hebben ook weer nadelen kbedoel qG kan weer een lan houden.. Voor ons is dit nogal lastig om te regelen.

Maarja we zien wel

Maandag naar Walibi met Majin en Exp!!. Wie gaat er nog meer mee?

Tot nu toe gaan mee:

Majingoku
Experienz
Shini girl -
dSis

* - misschien.

 

GVD, mijn xbox raakt oververhit elke x. Klote ding.

 

Ventilator erop voor zolang en 30 augustus Microsoft bellen

 

Weet je wat het is? Ik heb een ventilator erop, elke x als ik GoW erin doe of een andere game. Na 5 minuten BOEM Red lights. dus dit is zeer klote ik laat hem nu heel lang afkoelen daarna nog een x proberen anders heb ik een probleem .

 

Welke fout code heb je?
Houd de sinc-button op de 360 in gedrukt en druk op de eject-knop. Doe dit nogmaals, en nogmaals en nogmaals.

4 knipperende lampen = 0
1 knipperende lamp = 1
2 lampen = 2
3 lampen = 3

Heb je code 0102 dan is ie flink dood. Anders ff kijken wat het inhoud.

 

huh wat is de sinc button enzo? En moet ik dat doen als hij rood is?

 

Dat is dat kleinde ronde witte knopje op de 360. Ergens naast zo'n memory slot.

En jep, als hij rood is (hij gaat dan heel snel rood knipperen in dus 1, 2, 3 of 0)

 

oke moment.

 

Sections 1, 2, 3, and 4 are flashing red
- The AV cable cannot be detected
/ \
\ /

THINGS TO TRY

1. Make sure that the AV cable is correctly connected to the Xbox 360 console.
2. Disconnect the AV cable from the Xbox 360 console, and then reconnect the AV cable to the Xbox 360 console.
3. If the four flashing red lights continue to flash, try wiping the metal area of the AV pack with a dry cloth. The metal area is the end that plugs into the console. Wipe the metal area thoroughly, and then try the AV Pack again.
4. If the AV cable is correctly connected but the four red lights are still flashing, substitute a different AV cable if you have one available.

=============================

Sections 1, 3, and 4 are flashing red
- General Hardware Failure
/ \
\ /

The specific type of hardware failure can be determined by a "hidden" error code

• Turn the xbox 360 on, and wait till the 3 red lights are flashing.
• Press and hold the sync up button (the small white one), while holding that button press the eject button.
• The LEDs will now blink the first number in the code (as described below).
• Release the eject button and press it again.
• The LEDs will now blink the second number of the code.
• Release the eject button and press it again.
• The LEDs will now blink the third number of the code.
• Release the eject button and press it again.
• The LEDs will now blink the forth number of the code.
• Release the eject button and press it again.
• The LEDs will go back to the 3 red flashing lights.

You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:

• All four lights flashing - 0
• One light flashing - 1
• Two Lights flashing - 2
• Three lights flashing - 3

0001 power supply problem
0002 power supply problem
...
0010 over heating
0011 over heating
0012 over heating
0013 over heating
...
0020 (Not yet known, possibly overheating)
...
0022 GPU Error / GPU Overheating
...
0102 unknown error - littereally means the console does not know what is wrong. possibly a short or cold solder joint somewhere (2 reports of people repairing this, one was removing moisture build up inside the console, the other used a hot-air rework to reflow the BGA Ram chips)
...
0110 (Not yet known)
...
1022 (Not yet known)

THINGS TO TRY

1. Try restarting the console.
2. If restarting the console does not resolve the behavior, follow these steps:
   • Turn the console off.
   • Unplug all the power and AV cables from the console.
   • Unplug the power cord from the wall socket.
   • Firmly reconnect all the cables.
   • Turn on the console.
3. If these steps do not resolve the behavior, turn the console off, remove the hard drive, and then turn on the console. If the 3x Red LED error light is no longer displayed, turn the console off, re-attach the hard drive, and then turn on the console.

=============================

Sections 1, and 3 are flashing red
- Overheating
/ \
\ /

THINGS TO TRY

1. Let the Xbox 360 console cool.
   Note You may have to wait several hours for the console to cool enough. Do not turn on the console when the console is hot.
2. Verify that the console has sufficient ventilation and that the fan is operating. For more information about ventilation, see the "More Information" section.

PREVENTION SUGGESTIONS
To try to prevent this problem, use the following precautions:

• Do not block any ventilation openings on the Xbox 360 console.
• Do not put the Xbox 360 console on a bed, on a sofa, or on any other soft surface that may block ventilation openings.
• Do not put the Xbox 360 console in a confined space, such as a bookcase, a rack, or a stereo cabinet, unless the space is well-ventilated.
• Do not put the Xbox 360 console near any heat source, such as a radiator, a heat register, a stove, or an amplifier.

DO NOT EVER PUT YOUR CONSOLE IN THE FREEZER OR OUT IN COLD WEATHER
Some people think that doing this might help "fix" an overheating console, in fact doing so could cause even bigger problems. Electronic devices like your console are made to function at and around room temperature, extreme cold temperatures can often cause just as many problems as extreme warm temperatures (such as overheating). Also if the console is located in a dramatically cold area while running, the difference in temperature between the hot console and cold air can create condensation which in turn will short out your console making the situation far worse. Condensation will happen more quickly if your console is overheating due to the greater difference in temperature. In short... DON'T DO IT.

=============================

Section 4 is flashing red
- Hardware Failure
/ \
\ /

The Specific Type of hardware failure can be determined by the error code displayed on the screen.

E45: Unknown (possibly dashboard update related)

E64: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc.

E65: DVD Drive Error.... DVD Timeout, Wrong firmware, dvd is without f/w chip, etc. This can also be caused by the tray not being fully closed on boot.

E66: DVD Drive Error: DVD model, or version does not match that of the version expected by the dashboard. OR the firmware version on the drive is older then the firmware version expected by the dashboard. Make sure the DVD drive is of the same version originally included with the console and that it is using either the original firmware included with the console or newer.

E67: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

E68: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it, This can also be caused by a Hard Drive Eprom Error. Some also believe this might be caused by a problem with the fans.

E69: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it

E71: possibly a dashboard update error, Check below in the "Console Reset Codes" for instructions. If that does not work there is no other solution and the console must be sent back to MS for repair.

E72: (not yet known)

E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port.

E74: AV cable error... There is a problem with the AV cable, try using a different AV cable. If the cable is known to be working then there is a 90% chance it's a scaler chip problem (the "ANA" or "HANA" chip connected directly to the AV cable) in rare cases it is the GPU.

E76: (not yet known)

E79: Hard Drive Error... It could be a problem with the Hard Drive itself or a problem with the internal connection to the hard drive, Try removing the hard drive and playing without it